Alkohole-Domowe.com

Kod: Zaznacz cały

/*

*/
// Biblioteki
#include <Wire.h>
#include <LiquidCrystal_I2C.h>
#define BLYNK_PRINT Serial
#include <ESP8266WiFi.h>
#include <BlynkSimpleEsp8266.h>
#include <OneWire.h>
#include <DallasTemperature.h>
#include <Ticker.h>

#define LED D0  //D0 pin led by właczyć stan niski


//Instalacja
LiquidCrystal_I2C lcd(0x27, 20, 4);
OneWire oneWire(D7); // digital D2 pin
DallasTemperature sensors(&oneWire);



//Ticker blinker;
//=======================================================================
//void ICACHE_RAM_ATTR onTimerISR(){
//    digitalWrite(LED,!(digitalRead(LED)));  //Toggle LED Pin
//    timer1_write(600000);//12us
//}
//=======================================================================






// Blynk
BlynkTimer timer;
BlynkTimer timer_LCD;
// You should get Auth Token in the Blynk App.
char auth[] = "Tu wpisujemy token aplikacji Blynk";
// Your WiFi credentials.
char ssid[] = "tu wpisujemy nazwę swojej sieci wifi";
char pass[] = "a tu wpisujemy hasło sieci";


// Zmienne

  

  //char TempCharBuffer[12] = "0000000000\0"; // "-2147483648\0"
  
  float B_1 = 0.0;
  float B_2 = 0.0;
  float B_3 = 0.0;
  float B_4 = 0.0;
  float B_5 = 0.0;
  float B_6 = 0.0;

#define ile_ekranow 2
 byte aktualny_ekran = 1;






void setup()
{
  pinMode(LED,OUTPUT);

    //Initialize Ticker every 0.5s
   // timer1_attachInterrupt(onTimerISR);
   // timer1_enable(TIM_DIV16, TIM_EDGE, TIM_SINGLE);
   // timer1_write(600000); //120000 us

  //Inicjalizacja LCD
  lcd.init();        
  lcd.backlight();
  //Blynk.begin(auth, ssid, pass); //Autoryzacja Blynk
  lcd.clear();

  // Instalacja Monitora portu szeregowego  
  Serial.begin(115200);
  Blynk.begin(auth, ssid, pass);
  sensors.begin();

  
  // Setup a function to be called every second  ???
  timer.setInterval(1000L, sendTemps);
  timer_LCD.setInterval(5000L, timerLCD);


  
}

void timerLCD()
{
	 lcd.clear();
	
    if(aktualny_ekran == ile_ekranow) 
    {
		aktualny_ekran = 1;
	}else
	{
	    aktualny_ekran++;
    }
	
}


void ekran1()
{
	//Tytuł
  lcd.setCursor (2, 0);
  lcd.print("Termometr 6x DS");

 
// Beczka 1
  lcd.setCursor (0, 1);
  lcd.print("Beczka_1:");
  lcd.setCursor (10, 1);
  //lcd.print(sensors.getTempCByIndex(0));
  lcd.print(B_1);
  lcd.print((char)223);
  lcd.print("C");



// Beczka 2
  lcd.setCursor (0, 2);
  lcd.print("Beczka_2:");
  lcd.setCursor (10, 2);
  //lcd.print(sensors.getTempCByIndex(1));
  lcd.print(B_2);
  lcd.print((char)223);
  lcd.print("C");



// Beczka 3
  lcd.setCursor (0, 3);
  lcd.print("Beczka_3:");
  lcd.setCursor (10, 3);
  //lcd.print(sensors.getTempCByIndex(2));
  lcd.print(B_3);
  lcd.print((char)223);
  lcd.print("C");

}

void ekran2()
{
	//Tytuł
  lcd.setCursor (2, 0);
  lcd.print("Termometr 6x DS");
  
// Beczka 4
  lcd.setCursor (0, 1);
  lcd.print("Beczka_4:");
  lcd.setCursor (10, 1);
  //lcd.print(sensors.getTempCByIndex(3));
  lcd.print(B_4);
  lcd.print((char)223);
  lcd.print("C");

 
 // Beczka 5
  lcd.setCursor (0, 2);
  lcd.print("Beczka_5:");
  lcd.setCursor (10, 2);
  //lcd.print(sensors.getTempCByIndex(3));
 lcd.print(B_5);
  lcd.print((char)223);
  lcd.print("C");


  // Beczka 6
  lcd.setCursor (0, 3);
  lcd.print("Beczka_6:");
  lcd.setCursor (10, 3);
  //lcd.print(sensors.getTempCByIndex(3));
 lcd.print(B_6);
  lcd.print((char)223);
  lcd.print("C");

}

void updateLCD()
{
//Konfiguracja LCD
///////////////////////////////////////////////////////////////////////////////
 //GŁO
//       lcd.setCursor(0, 1);
//        lcd.print("GLO");
//        lcd.setCursor(4, 1);
//         if(gParametryPracy.gTempGlowica != -127.00)
//        {
//         memset(TempCharBuffer,0,sizeof(TempCharBuffer));
//               dtostrf(gParametryPracy.gTempGlowica, 5, 1, TempCharBuffer);
//               sTmpStr = TempCharBuffer;
//               sTmpStr.trim();
//               sTmpStr += " ";
//         lcd.print(sTmpStr.c_str());      
//          }else
//          {
//         lcd.print("brak");   
//        }   


        ////////////////////////////////////////////////////////////////////////////////////////////////


 
 // lcd.clear();

 
	switch(aktualny_ekran)
	{
		case 1:
		{
			ekran1();
			break;
		}
		
		case 2:
		{
			ekran2();
			break;
		}
				
	}
}


void sendTemps()
{
 sensors.requestTemperatures();
 
 B_1 = sensors.getTempCByIndex(0);
 Serial.println(String("Beczka_1 =")+B_1+ String(" C"));
 Blynk.virtualWrite(V1, B_1);

 B_2 = sensors.getTempCByIndex(1);
 Serial.println(String("Beczka_2 =")+B_2+ String(" C"));
 Blynk.virtualWrite(V2, B_2);


B_3 = sensors.getTempCByIndex(2);
 Serial.println(String("Beczka_3 =")+B_3+ String(" C"));
 Blynk.virtualWrite(V3, B_3);


B_4 = sensors.getTempCByIndex(3);
 Serial.println(String("Beczka_4 =")+B_4+ String(" C"));
 Blynk.virtualWrite(V4, B_4);


B_5 = sensors.getTempCByIndex(4);
 Serial.println(String("Beczka_5 =")+B_5+ String(" C"));
 Blynk.virtualWrite(V5, B_5);


B_6 = sensors.getTempCByIndex(5);
 Serial.println(String("Beczka_6 =")+B_6+ String(" C"));
 Blynk.virtualWrite(V6, B_6);


 //digitalWrite(LED_BUILTIN, HIGH); 
 digitalWrite(LED_BUILTIN, LOW);
 
 updateLCD();
   
}



void loop()
{
  Blynk.run();
  timer.run();
  timer_LCD.run();
}